[vrathi]

Hi! I would be interested in your experience in ways of controlling (semi or fully automated) irrigation system of a small or medium garden. Do you prefer a classical (inexpensive) control unit (such as the Hunter X-Core series) with a manual timer setting on the unit, or you've tried some more sophisticated solutions including a way you can set and change irrigation times, or including "more" automation by connection to more sensors? If so, in which solution do you see benefits?

I have used a manual starter with a simple built-in timer, but it did not suit me due to the need for greater variability of irrigation terms, nor did the classical unit satisfy me. Later, I have designed and created my own solution. The control unit has no controll buttons and it is located in an isolated box near the valves (due to location it is easier to connect the water level meter and the soil humidity sensor). I communicate with the unit wirelessly using my cell phone and I can set routine irrigation terms and also one-time terms. The set irrigation times are automatically turned off if the soil is wet. The control solution ove the app is similar to the classic Android alarm clock. I have tested it for one season so far and now I try to compare the features and look at what can be improved yet. Now I am also interested in your opinions about that.

 

[Ware]

Welcome to TLF! I use a Rachio.

 

[g-man]

I use a Rachio too. They took care of all the app development.

 

[Ware]

Here is a good thread about it. :thumbup:

 

[Mightyquinn]

I too use a Rachio and highly recommend them!

 

[Shayne]

Hunters hydrawise controller is really awesome. Full cloud based control and weather station access to adjust watering according to current weather

 

[Pete1313]

I too have hunter hydrawise and enjoy it. I don't use much of the smart watering features as I track ET watering myself, but enjoy being able to adjust and monitor it from my phone no matter where I'm at. The biggest reason I chose hydrawise was at the time how easy it was to hook up a flow meter and track GPM usage. You can also set alerts when GPM is too high or low for a zone, if it fails to detect GPM when a zone is running, but most importantly for my system with 25yr old main lines is it will alert you if flow is detected when there are no zones running.