I'm planning out my post seeding nitrogen applications and have just about all of my numbers squared away.
I have broken down my yard into subsections and for my front yard, the largest one area that I need to spray, I'll be putting down 3lbs of Urea, to hit a 1/2lb of N for 2,584sq ft.
Being that this is the heaviest single application (all other areas fall sub 3lbs of Urea), is this too much Urea to mix in just 4 gallons of water...which is my total tank capacity. Or should I divide the Urea up evenly and apply two overlapping applications back to back? i.e. 1.5lbs of Urea one application, followed immediately by a second round of 1.5lbs Urea.
I've also dialed in my calculations that of 2 cups = 1lb of Urea granulars --- with that said, the bag states 2.5cups = 1lb of Urea, though wanted to err on the side of caution is this is my first time spraying and would prefer to put slightly less down than more in hope to reduce my risk of burn.
I have broken down my yard into subsections and for my front yard, the largest one area that I need to spray, I'll be putting down 3lbs of Urea, to hit a 1/2lb of N for 2,584sq ft.
Being that this is the heaviest single application (all other areas fall sub 3lbs of Urea), is this too much Urea to mix in just 4 gallons of water...which is my total tank capacity. Or should I divide the Urea up evenly and apply two overlapping applications back to back? i.e. 1.5lbs of Urea one application, followed immediately by a second round of 1.5lbs Urea.
I've also dialed in my calculations that of 2 cups = 1lb of Urea granulars --- with that said, the bag states 2.5cups = 1lb of Urea, though wanted to err on the side of caution is this is my first time spraying and would prefer to put slightly less down than more in hope to reduce my risk of burn.
