[TC2]

First time using zerks. The nozzle is apparently a standard push on twist pull off (Carbyne), except I can't seem to get it off. The zerk in question is the GM1600 front roller, which is limited in maneuverability for angling, and the first zerk I tried. So before I end up breaking something, do I simply need to just pull harder or am I missing something?

 

[Ware]

I'm no help, but I use a Lincoln Grease Needle for pretty much everything (including my GM1600).

 

[MasterMech]

Sometimes the couplers get stuck on if they are new and there is still some pressure in the line. You need to do one of two things to get the coupler to let go, relieve pressure or unscrew the face of the coupler, which will relieve pressure or just free it up mechanically.

 

[TC2]

Sometimes the couplers get stuck on if they are new and there is still some pressure in the line. You need to do one of two things to get the coupler to let go, relieve pressure or unscrew the face of the coupler, which will relieve pressure or just free it up mechanically.

That got it :thumbup: