[Jconnelly6b]

Items are delivering tomorrow, I plan to spray end of this week. My parents are coming up next weekend and want the yard to look tip top. Plus I believe I need some iron anyway...

I just ordered the ingredients for the ferrous ammonium sulfate spray, and have yet to apply Humic 12. I also have insecticide delivering tomorrow, Mavrik Perimeter.

I want to mix all 3 - what are your thoughts? If I remove any, it would be the Humic 12 bc the bugs and appearance are top priority right now.

 

[PokeGrande]

You may have issues mixing with the FAS.

Be sure to test mix this product also before adding it to another product, I do know that this CAN be mixed without any issue with the Talstar P that I mentioned above.

I hope this post was helpful and as with anything you are applying to your lawn be sure to READ THE LABEL before application as this is just a quick overview of the products.

Any idea if both of these can be mixed with a PGR?! Im due for my next application I'm having to leave town for the weekend and decided to put down a low dose of PGR to keep the lawn from growing too tall while I'm gone. I'm Trying to spray them all at once.

I tried to mix them a few years ago and they didn't mix well but I had also added Ferrous Ammonium Sulfate so I was thinking that may have been the culprit. All you have to do is get a gallon jug and add the correct amounts for 1K and give it a good shake and then wait a few minutes to see if there are any chunks or separation. If it does mix well you can just add the 1 gallon you made to what you are going to spray. It may work without the FAS! Please report back your findings if you decide to test.

https://thelawnforum.com/viewtopic.php?f=2&t=129

 

[wardconnor]

I have done that. I used Chelated Iron but I have done it. It seemed to work just fine.

 

[crussell]

Last week I mixed FAS and Humic Extreme Blend (Kelp4Less) and did not have any issues.

 

[Ral1121]

Last week I mixed FAS and Humic Extreme Blend (Kelp4Less) and did not have any issues.

Really how did you mix it up? I tried both extreme blend first then fas and vice versa and got iron flakes forming.

 

[crussell]

Well this may be unconventional, but I weighed out my extreme blend, and FAS and then pre-blended them dry. Then I slowly added the mixture to about a gallon of warm water while using a drill mixer. then I added cold water to my final volume.

 

[Jconnelly6b]

@crussell that sounds like a best practice for the iron products.

Last night I mixed the Mavrik and Humic 12 with a little NIS. Blended beautifully. I will do FAS + PGR + Serenade this week sometime.

 

[Jconnelly6b]

Decided to add the 0-0-2 Micro Green to my FAS+PGR+Serenade mix. Added 1 oz. gallon MSO too. Wasn't thick at all, no issues mixing or spraying, and no floculant.