I recently had irrigation system installed and I’m waiting on my first powered reel mower to come in (Revolution 26). I have a Bermuda sod lawn, about 6 yrs old. I’ve been cutting low with my rotary to train the grass before my reel mower comes in; HOC approximately 1.25”.
There are a few sprinkler heads that are high enough that I can’t mow over them with the rotary. I can only assume if they’re too high for the rotary, then they will be too high for the reel.
I asked the irrigation contractor to come lower the heads, but it seems like they just raised the soil around those heads, as I’m still having the same issue. Any advice?
There are a few sprinkler heads that are high enough that I can’t mow over them with the rotary. I can only assume if they’re too high for the rotary, then they will be too high for the reel.
I asked the irrigation contractor to come lower the heads, but it seems like they just raised the soil around those heads, as I’m still having the same issue. Any advice?
