So my (almost new) Chapin backback sprayer is now a mildly dysfunctional backpack sprayer. When I went to spray my pre-E, I found out that the sprayer tube was cracked almost the entire length. Suspect one of my kids stepped on it or something got dropped on it at some point. But regardless, need to fix it. Looks like I can replace the tube with the same piece for about $22 (https://www.domyown.com/chapin-replacement-sprayer-tube-part-68219-p-1808.html). But, was wondering if there was an "upgrade" of some sort I should make since I'm replacing the piece anyway. If so, how should I upgrade?
Replacement Wand for Chapin
1 - 3 of 3 Posts
That is probably your cheapest option. You could get the same part a little cheaper/faster if you have Amazon Prime.
Do you use a CF Valve on your setup? If not, this would be a good time to add one.
Alternatively, you could scrap the OEM setup and build a dfw_wand.
Do you use a CF Valve on your setup? If not, this would be a good time to add one.
Alternatively, you could scrap the OEM setup and build a dfw_wand.
Joined
·
210 Posts
I own the same backpack sprayer. When it came in I cut the wand off and built the one Ware mentioned. Buy nice or buy twice.
1 - 3 of 3 Posts
