Lawn Care Forum banner
1 - 1 of 1 Posts

· Super Moderator
2,272 Posts
Using Red's advice I made my own out of an old piece of angle iron I had laying around. I tapped the hole I drilled so I wouldn't have to mess with the epoxy. Works flawlessly on my greens mower as well as the TruCut H-20. I do have to flip it around though as the bedknife placement is different in between the rollers.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.