Lawn Care Forum banner
1 - 9 of 9 Posts

· Registered
Joined
·
630 Posts
Discussion Starter · #1 ·
I just picked up a cheap mclane 17" powered reel off craigslist. Did a carb rebuild and got it running well. I have been trying to find an owners manual for it though, specifically for the different height adjustments. I have not found anything online and what I do find is for the 20 or 25 models. The 17" is a different design. Any help would be greatly appreciated.
 

· Registered
Joined
·
630 Posts
Discussion Starter · #5 ·
I know that moving the front wheels up and down will change the main hoc. Then you have fine adjustment on the left side with 6 or 8 slots. I am looking for these measurements for hoc so I don't have to measure each setting to figure it out. Would save me a lot of time.
 

· Registered
Joined
·
486 Posts
Ral1121 said:
I know that moving the front wheels up and down will change the main hoc. Then you have fine adjustment on the left side with 6 or 8 slots. I am looking for these measurements for hoc so I don't have to measure each setting to figure it out. Would save me a lot of time.
I'm not finding anything. And I've been looking a ton. Your best bet will probably be to adjust and measure each setting. Much more accurate that way anyhow. Any publication will just be an approximation anyhow.

Does it have a front roller? If not, are you planning on installing one? If so, that would change your HOC from the factory specs anyhow.
 

· Registered
Joined
·
630 Posts
Discussion Starter · #7 ·
That's what I figured. I am planning on installing a front roller and getting a grass catcher. Other then that I do not want to spend any more money on it. I am using it as a beginner piece for the next couple years before I decide to buy something new. During that time I will also be working on getting my lawn more level. Then I will possibly look at a trucut or even the swardman which has really caught my eye.
 
1 - 9 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top