I just purchased 7 Rainbird 5000 rotors and I'm trying to determine which nozzles to use. Does it matter if you look at the precipitation rate or gpm?
My lawn is rectangular 60x30 so 3 heads go across the front and back with 1 in the middle going 360. The 4 corners running at 90 degree arcs are going to be spitting out twice the amount as the two in the middle doing 180s. So the nozzles I choose for the corners should put out half the amount of water, correct?
My lawn is rectangular 60x30 so 3 heads go across the front and back with 1 in the middle going 360. The 4 corners running at 90 degree arcs are going to be spitting out twice the amount as the two in the middle doing 180s. So the nozzles I choose for the corners should put out half the amount of water, correct?
